Odessa Electrical Company handles residential and commercial electrical work across Odessa and Ector County, Texas. Whether you need a fast repair, a panel upgrade, new wiring, or an EV charger circuit, we scope the job on the call and get it scheduled without the back-and-forth. Safe wiring. Solid workmanship. Straight answers.
Call (432) 326-6289 for a quote.
We're ready to get your circuits working again.
Electrical problems don't wait, and neither do we, so the first step is understanding exactly what is happening before anything gets touched. A service call starts with a real conversation about the symptom, whether that is a light that flickers under load, an outlet that stopped working, or a breaker that trips every time a particular appliance runs.
Flickering lights are often a loose connection at the fixture, the switch, or the panel. They can also point to an overloaded circuit that needs to be split or upgraded. Dead outlets in a kitchen, bathroom, or garage are frequently a tripped GFCI circuit, but if resetting the outlet does not bring it back, the fault is usually upstream and worth tracing properly. A breaker that keeps tripping is telling you something: the circuit is carrying more than it was designed for, or there is a fault in the wiring that needs to be found.
We also handle light switch failures, dimmer compatibility problems, and AFCI breaker nuisance trips that come from older wiring interacting with newer protective devices. You get straight answers about your panel and wiring before any work is scheduled, so you know what the job involves and what it is going to cost.
Dead outlets usually have a simple cause worth finding.
This area has every kind of panel and circuit in it, from mid-century fuse boxes in older Odessa neighborhoods to 200-amp services in newer builds that are already running close to capacity. When a home or business adds a major appliance, an EV charger, or a dedicated cooling circuit, the panel has to be able to carry the load.
A 100-amp to 200-amp panel upgrade involves a load calculation, a new main panel, and in many cases a service-entrance upgrade at the meter. We handle subpanel installation for detached garages, workshops, and commercial build-outs where the main panel is too far away to run individual circuits efficiently.
Older housing stock in Ector County sometimes turns up aluminum branch-circuit wiring, which requires specific connectors and devices rated for aluminum conductors. We assess what is there and explain the remediation options before any work begins. Knob-and-tube wiring, where it still exists in older properties, gets the same treatment: a clear explanation of what is present and what the practical options are.
Electrical service is scheduled without the runaround. Call, get the scope, and get it on the calendar.
We'll take care of the circuits from here.
Wiring is easier to deal with when somebody explains it plainly, and that starts before we arrive. On the call, we go through what you are trying to accomplish and what the job is likely to involve.
New outlet installation covers standard 15-amp and 20-amp receptacles, GFCI outlets for wet locations, AFCI outlets for bedrooms and living areas, USB combination outlets, and 240-volt outlets for dryers, ranges, and workshop equipment. Dedicated circuit installation for major appliances is one of the more common jobs we handle: a refrigerator, a chest freezer, a dishwasher, or a window unit running on a shared circuit is a recipe for tripped breakers and shortened appliance life.
Smart switches, smart outlets, and dimmer switches all require the right wiring configuration to work correctly. If a box is missing a neutral wire or the circuit is not grounded, we address that as part of the installation rather than working around it.
Home rewiring and partial rewiring come up when a property has outdated wiring that cannot safely support current loads, or when a renovation exposes wiring that needs to be brought up to current standards. We scope the extent of the work on the call and give you no-pressure estimates, priced up front, so you can make a decision without feeling pushed.
A flickering light and a full rewire start the same way, with a clear picture of what is actually going on. Lighting work ranges from a single fixture swap to a whole-home recessed lighting installation, and we handle both ends of that range.
Recessed lighting installation and LED retrofits are among the most requested upgrades we see. Track lighting, under-cabinet lighting, and pendant lights all involve circuit work that goes beyond the fixture itself, and we make sure the circuit is sized correctly for the load. Chandelier installation and vanity lighting in bathrooms require attention to junction box ratings and, in wet locations, appropriate fixture ratings.
Ceiling fan installation and replacement involve more than swapping a fixture. A fan needs a rated box, proper wiring for the fan and light kit, and in some cases a new switch leg if the existing wiring does not support separate controls. We handle the wiring from the box back to the switch.
Outside, we install security lighting, motion sensor lights, and landscape lighting circuits. Exterior outlets for patios and outdoor work areas are a regular job, and we wire misting-system circuits and RV hookups for properties that need them. Smoke detector wiring and carbon monoxide detector wiring are straightforward add-ons when we are already in the walls or ceiling.
Homeowners call us for repairs, upgrades, and new installations. Landlords and property managers call when a rental unit has a wiring problem that needs to be diagnosed and fixed correctly before a tenant moves in or a lease renews. We handle home additions, garage wiring, and workshop circuits where a new subpanel or a run of dedicated circuits makes the space actually usable.
On the commercial side, we work in offices, retail spaces, and warehouses across Odessa. Commercial panel upgrades, commercial lighting retrofits, and new circuit installation for equipment are all part of what we do. New construction electrical covers rough-in and finish work, coordinated around the build schedule.
Pool pump wiring, hot tub circuits, and spa electrical hookups come up regularly here, and we handle the dedicated circuit, the disconnect, and the GFCI protection those installations require.
The person who answers the phone can tell you what the visit involves. A local electrician for homeowners, property managers, and business owners across the area, we work through what you need before anything is scheduled. Plain answers. Clear options. Safe wiring.
Odessa's heat, sun exposure, and energy demands create specific electrical needs that come up on nearly every property in the area. These three services reflect what we see most often.
West Texas summers push air-conditioning systems to run continuously for months, and that sustained load adds up fast on a panel that was sized for a different era. Homes and businesses in Odessa that are adding major cooling equipment, large appliances, or new circuits regularly find that their existing service cannot carry the load without upgrades. A panel upgrade involves a load calculation, a new main breaker panel or subpanel, and where needed a service-entrance upgrade. Older properties in the area benefit most, but newer builds adding significant equipment need the same assessment.
This region sees some of the strongest sun exposure in the country, and residential and commercial solar adoption across West Texas reflects that. The electrical work on a solar installation covers the wiring from the solar array to the inverter, battery backup circuits where a storage system is included, and the interconnection between the system and the main panel. We handle new installations and retrofits on existing properties, for both homes and commercial buildings.
A Level 2 home EV charger requires a dedicated 240-volt circuit and, in many cases, a panel capacity check before anything is run. We assess what the panel can support, run the circuit to where the charger will be mounted, and confirm the installation is ready to use. For commercial properties adding EV charging stations, the scope includes load planning and panel work to support multiple circuits. Call for a quote and the price is confirmed before scheduling begins.
Common questions about electrical costs - what a panel upgrade runs, what it costs to rewire a house, what an electrician charges per hour - do not have a single answer because the job scope drives the price. What we can tell you is how we handle it.
When you call, we go through what you need and give you a price before anything is scheduled. That covers repairs, panel work, outlet and circuit installation, lighting, EV charger circuits, generator hookups, and whole-home surge protection. Surge protection is worth asking about specifically: a whole-home device installed at the panel protects everything downstream from voltage spikes, which matters in an area where summer storms can send surges through the lines.
Electrical safety inspections are another call-driven service. Pre-purchase inspections, code-compliance checks, and panel inspections for older properties all start with a call to scope what the inspection covers and confirm the price before we come out.
No invented figures here.
Call (432) 326-6289, tell us what you need, and we will walk you through what it covers.
We serve Odessa as our primary market and take calls from across Ector County and the wider Permian region. Nearby communities we cover include Midland, Andrews, Monahans, Kermit, Pecos, and Big Spring.
Residential, commercial, and industrial-adjacent electrical work across the region is available seven days a week, from 8:00 AM to 8:00 PM. Whether the job is a quick repair or a larger installation project, the process starts the same way: a call, a clear scope, and a price before anything is put on the schedule.
Call (432) 326-6289 and describe what you are seeing.
We scope the job on the call, give you a price, and get it on the calendar before we hang up. You do not need to schedule a separate estimate visit before work can begin.
Yes. We work for homeowners, landlords, property managers, and commercial clients across Odessa and Ector County. The process is the same regardless of property type: call, get the scope and price confirmed, and schedule the visit.
When you call, we go through what the job involves and give you a price that covers the work we are coming out to do. That price is confirmed before anything is scheduled, so you know what you are agreeing to before we arrive.
You call and describe the problem or the work you need done. We ask follow-up questions to scope the job, confirm the price, and schedule the visit. When we arrive, we work through what was discussed on the call and let you know before anything changes.
A breaker that trips repeatedly on a normal load is telling you something about the circuit or what is drawing from it. Call us and describe what is running when it trips. We can often narrow down the cause on the call and come out to trace and fix it properly.
Resetting a breaker that will not hold is a temporary fix, not a solution. A breaker that refuses to stay on usually points to a fault in the wiring, an overloaded circuit, or a failing breaker that needs to be replaced. Continuing to reset it without finding the cause can create a safety problem.
Signs worth paying attention to include flickering lights that are not a bulb issue, outlets that feel warm, a burning smell near switches or the panel, or a panel that trips frequently. An electrical safety inspection covers the panel, the wiring condition, and the protection devices, and it gives you a clear picture of where things stand.
That depends on what the schedule allows on the day you call. We take short-notice work where the calendar has room, and urgent faults can often be fit in quickly.
Call (432) 326-6289 and ask what is open.
The price we give on the call is based on what you describe and what the job involves. If the scope changes when we get there because the situation is different from what the call indicated, we tell you before doing additional work. You are not committed to anything that was not discussed.
Odessa Electrical Company handles repairs, panel upgrades, wiring, lighting, EV charger circuits, generator hookups, and electrical safety inspections across Odessa and the surrounding area. We are available every day from 8:00 AM to 8:00 PM.
Safe wiring. Solid workmanship. Straight answers.
Call (432) 326-6289 for a quote.
We will go through what the job involves and give you the price before anything is scheduled.
We handle the full range of electrical work for homes and businesses across Odessa and Ector County, from a single tripped breaker to a complete service upgrade. The table below covers what each service involves, who it fits, and what is worth knowing before you call. Scope is confirmed on the phone, and the price is settled before anything is scheduled.
Call (432) 326-6289 and tell us what you are dealing with.
| Electrical Service | What the Job Involves | Best For | Worth Knowing |
|---|---|---|---|
| Wiring & Rewiring |
| Older homes with outdated or unsafe wiring systems | Aluminum and knob-and-tube wiring are common in older Odessa homes. We assess what is present and explain the options before any work starts. |
| Breaker & Fuse Repair |
| Homes with breakers that trip repeatedly or fail to reset | A breaker that keeps tripping is telling you something. We find the cause rather than just resetting it. |
| Outlet & Switch Installation |
| Homeowners adding convenience or updating older outlets | GFCI outlets can be installed in ungrounded locations as a code-recognized method of providing shock protection, labeled correctly. |
| Whole-Home Surge Protection |
| Homeowners with sensitive electronics or in areas with frequent summer storms | Summer storms across West Texas push real surges through the utility line. A panel-level device is the most effective point to catch them. |
| Solar & Battery Installation |
| Homeowners adding solar or battery storage systems in West Texas | We handle the electrical infrastructure side. The solar equipment itself is a separate trade. Our piece is the wiring, circuits, and panel work that makes the system run safely. |
| Electrical Panel & Service Upgrades |
| Homes adding EV chargers, solar systems, or high-draw equipment, and older homes with undersized panels | Odessa summers put continuous heavy load on panels. We run a load calculation to find out exactly what your service can carry before recommending any upgrade. |
| Ceiling Fan Installation |
| Rooms adding a ceiling fan for the first time or replacing an existing fixture | A proper ceiling fan install covers the box, the wiring, and the switch, not just hanging the fixture. |
| EV Charger Installation |
| EV owners in and around Odessa where driving distances make home charging practical | Installation starts with a panel capacity check. We confirm what the service can carry before recommending circuit size or any panel work. |
| Dedicated Appliance Circuits |
| Homeowners adding high-draw appliances or workshop equipment | Load calculations are part of how we plan dedicated circuits, so the work is sized right for what you are running. |
| Electrical Safety Inspections |
| Buyers, sellers, landlords, and property managers wanting a clear picture of the electrical system | These inspections are useful before a purchase, before a tenant moves in, or any time you want to know where things stand. |
| Lighting Installation |
| Homeowners updating interior or exterior lighting | Exterior lighting in West Texas needs to be wired and protected for sun exposure, heat, and blowing dust. |
| Electrical Repairs & Troubleshooting |
| Homeowners and businesses with an active electrical problem | We trace the fault before recommending any repair, so you know what is actually wrong before work begins. |
Call (432) 326-6289 to talk through what you are dealing with and get a straight answer on what it will take to fix it.
(432) 326-6289